Paragon Fusion7

Uses:  Glass Fusing    Glass Painting    Glass Slumping   
The Fusion-7 lid elements use an element groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins.
Imagine the glass you could sag, slump, and fuse with this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets. Enjoy the glittering beauty of dichroics. Make treasured gifts. When you own a Paragon kiln, you can experiment with new glass ideas to your heart’s content.

The Sentry Xpress 3-key controller is packed with features. It includes two modes: Single Speed and 8-segment Ramp-Hold.

Features of the Sentry Xpress 3-key Controller on Non-Ceramic Paragon Kilns

  • Design programs with up to 8 segments (steps) in Ramp-Hold mode.
  • Fire to a single temperature at a single speed in the simplified Single Speed mode.
  • Ramp-Hold mode can store 4 programs.
  • Skip a segment in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Change the target temperature in Ramp-Hold during firing without having to stop the kiln to reprogram.
  • Hold (soak) the temperature in both Single Speed and Ramp-Hold. Experiment with Hold to improve color saturation of china paints.
  • Add Hold Time during firing without having to stop the kiln to reprogram.
  • Control both heating and cooling in Ramp-Hold.
  • Program Review lets you check the program you are about to fire.
  • Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Use this to remind yourself to check on the kiln.
  • Temperature display throughout firing and cooling in your choice of °F or °C
  • Thermocouple Offset adjusts the thermocouple readout.
  • Set the Delay to turn on the kiln later to suit your schedule.
  • Error Messages report mechanical problems such as a disconnected thermocouple, stuck relay or broken element.
  • 12 Month Warranty
  • LED Lights show whether you are in program, review, or firing mode.
  • Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review these features in more detail.
  • Features of the Fusion-7

  • Digital Sentry Xpress with 8 Segment Ramp-Hold, Skip Segment & Program Review
  • Heating elements in top of all models
  • Element groove that eliminates element pins
  • ¼” heavy duty sheathed Type-K thermocouple
  • 2 ½” insulating refractory firebrick in walls and bottom; 3” firebrick lid
  • Lock-in lid support
  • Full-formed galvanized steel base
  • Louvered switch box, heavy duty wiring
  • Tapered peephole with plug for a wide view
  • The Fusion-7 can now ship by UPS. Enjoy lower shipping cost and faster service. Specially designed cartons and foam padding assure that the kiln will arrive safely.

    The Fusion7 Furniture Kit

    Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.

    1 - C-13 - 13” Round Shelf

    4 - 1” wide Square Posts, ½” long

    1 lb. Bag Glass Separator

    Return to Order

    Kiln Comes with Heavy Duty Rolling Stand, 18” Square x 18” High

    A deluxe kiln stand with locking casters is included with the kiln. Enjoy the convenience of rolling the kiln out of the way when it is not in use. The stand is rock solid. It fits together with interlocking components that assemble with one size of bolt. (Ships unassembled.)

    The 18” tall stand raises the kiln to a convenient height for loading and unloading. Should you need a vent, merely slide the collection cup of an Orton vent into a mounting bracket on the top of the stand.

    Optional Glass Window

    Many people consider the optional high temperature glass 1” x 3” window to be indispensable. You can watch every stage of fusing and slumping, from softening, to tack fuse, to full fuse, through the window at your convenience. By watching the glass, even beginners can fine-tune a digital program for precise results. When you see the glass fuse the way you had envisioned, write down the temperature shown in the display for future firings.

    Optional Deluxe Mercury Relay

    Order your new kiln with the quiet, reliable mercury relay instead of the standard mechanical relays. The life of a mercury relay has been measured in millions of on/off cycles. Mercury relays far outlast the standard mechanical relays and are optional on new kilns.

    Designed for production

    Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

    Optional colors at no extra charge

    Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.

    Return to Order

    Specifications

    Max. Temperature

    1700F
    926C

    Amps

    15

    Phase

    1

    Watts

    1800

    Nema

    5-15R

    Breaker Size

    20

    Circuit Copper Wire Size

    12 gauge

    TUV tested to CSA and UL Standard 499

    Y

    CE

    N

    IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

    Voltage

    120

    Hertz

    60

    Nema Details







    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

     

    Kiln Type

    Top Loading Round

    Sides

    7

    Understanding Chamber Measurements

    Chamber Volume

    0.69 CU.FT.
    19.54 litres

    Chamber Width

    14.50 IN
    368 mm

    Chamber Depth

    6.50 IN
    165 mm


    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    22.00W x 24.50D x 30.50H Inches
    559W x 622D x 775H mm

    The external kiln height includes a 18.5" tall stand.

    Ship Size

    30.00W x 30.00D x 26.00H Inches
    762W x 762D x 660H mm

    Ship Weight

    137.00 Lbs.
    62.14 Kg.

    Ship Method & Notations

    This Kiln Ships Via UPS