Janus-24 Glass/Ceramics/Pottery Kiln (With Furniture Kit)

by Paragon Industries, Inc.
$4,399.13
$3,250.00
GLASS MUST BE FIRED ON A SHELF.  ALL OF OUR GLASS KILNS (INCLUDING THE MULTI-PURPOSE JANUS KILNS) ARE PRICED INCLUDING THE RECOMMENDED FURNITURE KIT ($380 Value).
Uses:  Pottery     Ceramics     Glass     Multipurpose

The Paragon Janus-24 can fire both pottery and glass. Heating elements are mounted in the top, sidewalls, and door.

Glass and clay firing modes

Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.

In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces in pottery mode.

The Janus-24 digital kiln heats from the top, three sides and door for unsurpassed heat distribution. Bend glass for curved windows or cabinet doors and to repair lampshades. Make huge glass-fused platters. Crack the door to drag a rod across the softened glass or to emboss designs in the surface. Explore small-to-medium sized casting and pâte de verre. Enjoy the glittering beauty of dichroics. Make treasured gifts.

Advanced element grooves

The elements in the roof are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.

Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.

Heavy duty components

The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. A double heat shield and air gap between the kiln and ventilated switch box help keep electrical components cool for long, trouble-free service. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. font>

The spring-pressure latch and a ½" recess around the edge of the firebrick door keep the door tightly closed. The door remains rock-steady on a heavy hinge shaft. Four hand lifts aid moving. The base is open in the back and slotted to dissipate heat.

Thermocouple with “special limit” wire

The thermocouple senses temperature inside the kiln. It is the small rod that extends into the side of the firing chamber. The Janus-24 comes with an exposed-tip thermocouple made with special-limit wire for superior accuracy. The new and improved thermocouple replaces our earlier sheathed thermocouple. The new thermocouple is made in America to our exacting standards.

Two peepholes

Watch the red-hot glass through two tapered peepholes, drilled one above the other in the wall opposite the switch box. Peephole plugs are included.

Door safety switch

The kiln includes a door safety switch that turns off the elements when the door is opened. The controller remains powered and automatically resumes firing when you close the door.

Paragon’s innovative controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.

Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.

The Furniture Kit

Our price includes the Factory Recommended Furniture Kit ($380 Value)

Recommended furniture kit for the Paragon Janus-24 and equivalent sized kilns. Included:

1 - C-22GL Shelf (22” Square x 1”)

2 - C-30H Shelves (22” x 11” x 1”)

1 1/2” wide Square Posts, 4 of each - ½”, 1”, 2”, 3”, 4”, 5” lengths

1 lb. Glass Separator

Ware is fired on shelves that can withstand high temperatures. The shelves are separated by posts so you can fire multiple layers of ware in your kiln. Coat the shelves with kiln wash, which prevents glaze or glass from sticking to the shelves.

Paragon’s durable cordierite shelves resist warpage and thermal shock. They are volume-stable.

Optional Stands

To raise your kiln to a workable height, we offer either the 21" stand with casters, or the 31" stand with casters when you order.  These stands are rock solid steel.  If you don't have a table stable enough to support 500 pounds of kiln, and furniture, you may want to purchase one.  If you want to be able to move the Kiln out of the way in your shop, either of these might be a good option for you.

240 or 208 volts (We will contact you after your order to verify your exact electric service requirements)

Most of Paragon’s standard 240 volt kilns can be ordered in 208 volts. To compensate for the lower voltage, Paragon’s 208 volt kilns use a different set of elements so they will perform as well as the equivalent 240 volt models. For this reason, the elements in 240 and 208 volt kilns, even for the same kiln model, are not interchangeable. So please be sure to specify the correct voltage when you order your kiln. By using different elements for different voltages, total watts consumed by different kiln versions remain the same. 240 and 208 kilns of the same model have the same maximum temperature rating.

Designed for production

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Optional colors at no extra charge

Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.

Specifications

Max. Temperature

2350F
1287C

Amps

45

Phase

1

Watts

10800

Nema

6-50R

Breaker Size

60

Circuit Copper Wire Size

6 gauge

TUV tested to CSA and UL Standard 499

Y

CE

N

IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

Voltage

240

Hertz

60

Nema Details







Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

 

Kiln Type

Front Loading Square

Sides

4

Understanding Chamber Measurements

Chamber Volume

4.68 CU.FT.
132.52 litres

Chamber Width

24.00 IN
610 mm

Chamber Depth

22.50 IN
572 mm

Chamber Height

15.00 IN
381 mm


The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

40.50W x 32.00D x 29.50H Inches
1029W x 813D x 749H mm

Ship Size

47.00W x 43.00D x 42.00H Inches
1194W x 1092D x 1067H mm

Ship Weight

425.00 Lbs.
192.78 Kg.

Ship Method & Notations

This Kiln Ships Via Truck