F200 Lamp Working Kiln

by Paragon Industries, Inc.

Uses:  Glass Bead Annealing    Lamp Working




This is a true high performance kiln that you will enjoy using often. Anneal large glass figurines up to 6” tall in the digital F-200 lamp working kiln. Raise the spring-loaded vertical-drop door to insert a glass figurine with a punty rod. Lower the door. The punty rod extends outside the firing chamber through the smaller punty rod door. This allows the glass to anneal safely. Maintain the annealing temperature indefinitely with the Sentry Xpress 3-key controller.

The F-200 not only fires figurines but also safely anneals glass beads to prevent breakage during cooling. The 2” tall, 11” wide double doors give 22” of width for inserting bead rods. This kiln is ideal for seminar teachers. It is like having two kilns instead of one.

With the element in the top, you can fuse and slump glass in this large, 25” wide x 15” deep versatile kiln. Enjoy even heat distribution for consistent firing results. The F-200 easily reaches fusing temperatures.

The F-200 has durable insulating firebricks in the roof, walls and floor. The element is seated in pinless grooves in the roof. The element is mounted in the top of the kiln for safety. There is no sidewall element.

The insulating firebrick, wrapped in heavy-gauge steel, soak up heat for slow, efficient cooling. Costly heavy-gauge nickel-plated copper wiring is covered with high temperature glass-braided insulation. The thermocouple, which senses temperature inside the kiln, is protected with a high-nickel stainless steel sheath for long life. No extra stand is needed; the built-in base stays cool even during extended hold times.

The F-200 has dual mechanical relays for extra reliability. They send power to the elements on command from the digital controller. Two relays last longer than the single relay of competitive kilns because of the reduced amperage going through the relays.

Features of the F-200

  • 2 - 11” wide x 2” high doors
  • 15” deep firing chamber (measured with doors closed)
  • Firebrick roof, walls, door, and floor
  • Dual mechanical relays; the optional mercury relay upgrade is available
  • 1 1/4” thick ceramic fiber punty rod doors
  • Mandrel holder with 19 slots
  • 1700°F maximum temperature: Make glass fusing, copper enameling, and silver clay
  • Pinless element grooves in the roof
  • Coated firebricks in roof
  • Mar-proof plastic feet
  • On-off safety switch
  • The F-200 has a user-friendly 3-key Sentry Xpress 3 Key Controller which includes two firing modes: Single Speed and 8-segment Ramp-Hold. The solid-state controller continually monitors the firing so you can spend your time productively without closely watching the kiln. The sealed controller touch pad keeps out dust and is easy to wipe clean.

    Optional colors at no extra charge

    Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.


    Max. Temperature










    TUV tested to CSA and UL Standard 499




    IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.





    Nema Details

    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.


    Kiln Type

    Front Loading Square



    Understanding Chamber Measurements

    Chamber Volume

    1.73 CU.FT.
    48.99 litres

    Chamber Width

    25.00 IN
    635 mm

    Chamber Depth

    15.00 IN
    381 mm

    Chamber Height

    8.00 IN
    203 mm

    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    36.00W x 28.00D x 24.00H Inches
    914W x 711D x 610H mm

    Ship Size

    42.00W x 37.00D x 35.00H Inches
    1067W x 940D x 889H mm

    Ship Weight

    280.00 Lbs.
    127.01 Kg.

    Doorway Clearance Needed

    26.00 Inches
    660.40 mm

    Ship Method & Notations

    This Kiln Ships Via Truck