VITRIGRAPH 1 (Free Continental US Shipping)
Easy to set up
After your Vitrigraph I arrives, you will be anxious to start using it. Fortunately, it is easy to set up. It fits perfectly on a beautifully crafted stand that gives you just the right amount of space. The kiln even plugs into a standard household outlet. The Vitrigraph I is surprisingly large for a 120 volt kiln.
The kiln fires rapidly up to 1900°F. It uses space-age ceramic fiber insulation, noted for energy efficiency. The digital controller fires with 3-key simplicity.
Loaded with features
The stainless steel jacket is vented to lower the surface temperature of the kiln. A safety toggle switch on the side of the electrical box shuts off power to the heating element. Use the switch to reboot the controller if ever needed. A built-in fuse protects the controller. And the Vitrigraph I is made in America.
- Fast-response, exposed-tip ¼” wide thermocouple
- Ceramic fiber bottom lifts out for easy replacement.
- Stand height: 31 ¼” / 793mm
- 3” hole in the stand under the kiln
- Plugs into standard 120 v outlet.
- Sentry Xpress 3-key controller with advanced options
- Energy-efficient ceramic fiber firing chamber heats rapidly.
- Stainless steel jacket is vented for lower surface temperature
- Safety on/off switch so you can easily reboot the controller.
Vitrigraph kiln safety precautions
Fire only glass scraps that are fusing compatible. Keep the electric cord out of traffic areas. Fire the kiln only with the help of an assistant. Pay attention to the kiln. Do not leave it unattended. Do not reuse the flowerpot that holds the scrap glass. Do not refill the flowerpot while the kiln is hot. Use only one flowerpot load of glass per session.
Wear safety glasses at all times. Small pieces of glass can scatter about when you break off the streamers.
Thermocouple with “special limit” wire
The thermocouple senses temperature inside the kiln. It is the small rod that extends into the firing chamber. The ¼” wide Type-K, 14-gauge, exposed-tip thermocouple is made with special-limit wire for superior accuracy. The exposed tip gives the controller a fast response time for even temperatures during holds. The thermocouple is made in America to our exacting standards.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.