JANUS-27 Glass/Ceramics/Pottery Kiln
The Paragon Janus-27 can fire both pottery and glass. Heating elements are mounted in the top and sidewalls.
Select between glass and pottery with the flip of a switch. With the switch in the glass position, heat comes from the top elements and the middle sidewall element. With the switch in the pottery position, heat comes from only the sidewall elements.
Imagine the glass and pottery you could fire in this kiln. Make small bowls, pendants, earrings, cufflinks, and even bracelets in clay or glass. Make treasured gifts. When you own a Paragon kiln, you can experiment with new ideas to your heart’s content.
In the glass mode, fuse and sag large glass projects placed on a single shelf. In the pottery mode, fire to cone 10. You can also fire several shelves of smaller glass pieces using the pottery mode.
The elements in the lid are mounted in a firebrick “ball” groove that eliminates element pins. The element coils are wider than the groove opening, so the elements stay in place without pins. The groove dissipates heat efficiently.
The lid on the Janus-27 is easy to lift with the exclusive, patented Paragon spring counter-balance. For easier maintenance, we use 2” high blank wall bricks in the top row of the Janus-27. Since the brick is without element grooves, it is less susceptible to damage during loading.
The patented control box on the Janus-27 opens forward for easy maintenance. A folding support arm holds the box in the open position. The control box is finished in a durable high temperature, water-base blue paint. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.
The thermocouple is protected with a high-nickel stainless steel sheath for long life.
A heavy galvanized steel base covers the reversible brick bottom completely. It folds up under the stainless case on all sides to strengthen the firing chamber. This is one more assurance that your Paragon kiln is built to last.
Wires are fastened to the elements with heat-dissipating connectors refined and proven over many years in Paragon kilns. Elements are coiled from the finest high-temperature wire available.
Large, tapered peepholes offer a wide view of the firing chamber with little heat loss. The peepholes, both sides of the lid and top rim of sidewall firebrick are hardened and sealed with a special refractory coating to protect the ware from dust.
And, of course, the Paragon Janus-27 is made in America by skilled workers. Many of them have been with Paragon for over a decade.
The Kiln Stand
The digital Sentry 2.0 includes two modes: Cone-Fire with programmed slow cooling and 18-Segment Ramp-Hold. It is manufactured by the Orton Ceramic Foundation exclusively for Paragon.
The controller has powerful features that you will enjoy using. Yet we have also worked hard to make the controller user-friendly.
Do you ever wonder how much electricity your kiln uses? The digital controller can figure this for you with the press of a button. Find out how little a kiln actually costs to fire. Learn to conserve energy by experimenting with firing speed, load density, etc.
- Glass/pottery selection switch
- 3” insulating refractory firebrick walls
- Sidewall elements in dropped, recessed brick grooves are easy to replace.
- Tapered peepholes for a wide view
- A steel floor pan supports the entire brick bottom of each kiln.
- One year limited warranty
- Available in 240, 200, 208, or 380 volt, 50 or 60 hertz, single or 3 phase.
- Easy-access control box with folding support arm.
- Since the Janus-27 is designed for porcelain, it also easily fire ceramics, china paint, decals, gold and, of course, glass.
The Optional Furniture Kit
The furniture kit consists of carefully selected fireclay shelves and posts for this particular model. When estimating the price of the kiln, include the cost of furniture. The furniture allows you to stack multiple layers of ware. Without it, you could fire only the ware that would fit on the kiln bottom.
Furniture Kit for Janus-27, TnF-27-3:
6 C-24H 1/2 Shelves (26” round x ¾” thick)
1 1/2” wide Square Posts, 6 of each -
1”, 2”, 3”, 4”, 5”, 6” lengths
1 lb. Bag Kiln Wash
Furniture Kit Shipping Weight: 145 lbs.
Designed for production
Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.
Optional colors at no extra charge
Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.