Fusion-16 Glass Kiln (With Furniture Kit)

by Paragon Industries, Inc.
$1,411.78
$1,085.00
  • Introduction
  • Features
  • Specifications
  • GLASS MUST BE FIRED ON A SHELF. ALL OF OUR GLASS KILNS ARE PRICED WITH THE FACTORY RECOMMENDED FURNITURE KIT INCLUDED ($75.32 Value)
    Uses: Glass Fusing

    Note: This video was produced by the Paragon factory. We offer significant discounts off the factory prices.

    Paragon’s square Fusion16 digital glass kiln operates on a 120 volt outlet. Its square firing chamber makes it ideal for fusing glass tiles.

    You can also fire small glass bowls, pendants, earrings, cufflinks, and even bracelets. Try out the newest glass techniques taught in seminars and books. Enjoy making stunning dichroic glass jewelry. Make gifts that your friends will treasure. When you own a Paragon Fusion-16, you can endlessly experiment with glass fusing.

    The Fusion-16 heats from the top for even heat distribution across the glass surface. The lid elements are mounted in pinless element grooves. The elements do not need pins, because the element coils are wider than the groove opening.

    Reliability at the Heart of the Kiln

    The Fusion16 has a two-year warranty. The temperature sensor, called a thermocouple, is covered with high-nickel stainless steel sheath for long life. A heavy steel base supports the reversible brick bottom. These features are extra assurance that your Paragon kiln is built to last. No extra stand is needed.

    The reliable Fusion-16 has two mechanical relays for long life. (The relays turn on the heating elements after receiving a signal from the digital controller.) The two relays in the Fusion-16 last longer than the single relay of competitive kilns, because less amperage goes through the dual relays of the Fusion-16.

    For your convenience, flip the switch on the front panel to turn off power to the controller when the kiln is not in use. The large, comfortable wooden lid handle stays cool.

    The Fusion-16 control box has a durable high temperature, water-base finish. We chose water-base paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

    Optional Glass Window and Bead Door

    Beginners and even experts love the optional high temperature 1” x 3” glass window. Watch every stage of fusing as your pieces begin to glow orange and then progress from tack fuse through full fuse. Watch the glass to fine-tune a digital program. (Always wear firing safety glasses, available from Paragon, while watching the glass through the window.)

    You can even anneal glass beads with your Fusion-16. Order the optional bead door, which mounts to the front of the kiln. Use your kiln to safely cool even large, ornate beads through the annealing range.

    Optional Lid Safety Switch

    The optional lid safety switch turns off power to the heating elements when the lid is raised. The controller remains powered. The switch turns the power to the elements back on when the lid is closed. The switch mounts to the back of the lid. IMPORTANT: The lid safety switch is required in some areas such as Canada and Europe.

    Optional Ceramic Fiber Lid (Retail $384.28 - Our price $320) add to cart

    The Fusion-series glass kilns can be ordered with an optional ceramic fiber lid in place of the firebrick lid. Serious glass artists have long requested the fiber top for their firebrick kilns. The ceramic fiber lid includes a deluxe brushed stainless steel outer lid cover.

    Deluxe Rolling Stand (Included)

    The Fusion 16 now comes with a deluxe rolling stand at no extra charge. The new stand has locking casters, a mounting bracket for the Orton Kiln Vent, and a greenware drying rack. You will enjoy the convenience of effortlessly moving the kiln out of the way when not in use. Click Here to learn more.

    Optional colors at no extra charge

    Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.

  • The Ease of Digital Firing

    Paragon’s compact, 3-key controller will help you achieve consistent results from one firing to the next. The controller has powerful features that you will enjoy using. Yet the controller is also user-friendly. It comes with a quick-start guide that you can hang on the wall for ready reference.

    The reliable Sentry Xpress 3-key controller includes two modes: Single Speed and 8-segment Ramp-Hold. Control both heating and cooling with simple 3-key operation.

    Features of the Sentry Xpress 3-key Controller on Paragon Fusion Kilns
    • Program up to 8 segments (steps) in Ramp-Hold mode.
    • Fire to a single temperature at a single speed in Single Speed mode.
    • Store up to 4 programs in Ramp-Hold mode.
    • Skip a segment in Ramp-Hold without having to stop the kiln to reprogram. (For instance, you want to skip to the annealing segment.)
    • Change the target temperature in Ramp-Hold during firing without stopping the kiln to reprogram.
    • Hold (soak) the temperature in both Single Speed and Ramp-Hold.
    • Add Hold Time during firing without having to stop the firing to reprogram.
    • Easily control both heating and cooling in Ramp-Hold.
    • Program Review lets you check the program you are about to fire.
    • Program the Temperature Alarm to sound when the kiln reaches a specific temperature. Program an alarm that will remind you to check on the kiln.
    • Temperature display throughout firing and cooling in your choice of °F or °C
    • Thermocouple Offset adjusts the thermocouple readout.
    • Set the Delay to turn on the kiln at a time that best suits your busy schedule.
    • Error Messages report mechanical problems.
    • The sealed touch pad keeps out dust and is easy to wipe clean.
    • LED Lights show whether you are in program, review, or firing mode.
    • Colorful, illustrated instruction manual. Download it from the “Additional Information” section below to review all the controller features in more detail.

    The Paragon Fusion-16 is proudly made in Mesquite, Texas by skilled technicians.

    The Fusion-16 Furniture Kit (Included in our price!)

    Glass must be fired on a ceramic shelf; never directly on the kiln firing chamber bottom.

    1 – 14” x 15” x 5/8” Shelf

    4 - 1” wide Square Posts, ½” long

    1 lb. Bag Glass Separator

    Designed for production

    Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

  • Specifications

    Max. Temperature

    1700F
    926C

    Amps

    20

    Phase

    1

    Watts

    2400

    Nema

    5-20R

    Breaker Size

    20

    Circuit Copper Wire Size

    12 gauge

    TUV tested to CSA and UL Standard 499

    Y

    CE

    Y

    IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

    Voltage

    120

    Hertz

    60

    Nema Details

    Kiln Type

    Top Loading Square

    Sides

    4

    Understanding Chamber Measurements

    Chamber Volume

    0.96 CU.FT.
    27.18 litres

    Chamber Length

    16.00 IN
    406 mm

    Chamber Width

    16.00 IN
    406 mm

    Chamber Depth

    6.50 IN
    165 mm

    The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

    Outer Size

    29.50W x 24.00D x 34.50H Inches
    749W x 610D x 876H mm

    The external kiln height includes a 18.5" tall stand.

    Ship Size

    36.00W x 34.00D x 28.00H Inches
    914W x 864D x 711H mm

    Ship Weight

    196.00 Lbs.
    88.91 Kg.

    Doorway Clearance Needed

    29.50 Inches
    749.30 mm

    Ship Method & Notations

    This Kiln Ships Via Truck

    Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

    The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.