Paragon FireFly Digital

Uses: China Painting Decals Dolls Fast Firings Glass Fusing Glass Painting Glaze Testing Low-Fire Ceramics Porcelain and Stoneware 

 

 

The portable and convenient Paragon FireFly Digital will give you unbridled freedom. It plugs in almost anywhere on a household 120 volt outlet. Take this kiln to seminars or on vacation.

Test Glazes with Digital Accuracy

Test glass and glazes in the FireFly Digital before firing production loads in a large kiln. Perfecting colors for larger work is faster and cheaper in a small test kiln than in a large kiln. Test glazes while you feel the momentum instead of when you have enough ware to fill your large kiln.

An Excellent Classroom Kiln

Because new teachers often inherit bags of unlabeled clay, many kiln loads have been ruined because the clay was fired to the wrong temperature. With your own classroom test kiln, you can fire small clay samples to determine the correct temperature. Your students can make gifts in time for a birthday or holiday instead of when the school’s large kiln is available.

Teachers are delighted to find that the FireFly Digital is relatively inexpensive. The kiln creates enthusiasm for the clay program, because students see their test results right away. And testing in a small kiln will vastly increase your students’ knowledge of glazes.

Good Choice for Beginners

You will never outgrow a small kiln. If you later buy a larger one, continue to use the small one for testing or small projects. A small test kiln is invaluable in solving ceramic glaze problems.  The kiln has plenty of power to reach 2350°F (1287°C).

L-Shaped Notches Strengthen the Firing Chamber

The Paragon FireFly Digital is made of durable 2 1/2" thick insulating firebrick, which stores heat for slow cooling and safe annealing of smaller glass projects. The solid 2 1/2" thick firebrick top and bottom help seal in the heat.

The hinged lid is self-adjusting to compensate for expansion at high temperatures. The hinge includes a stop that holds the lid open and out of the way. Lift the lid with a handle on the front or a separate handle on the side.

To strengthen the firing chamber, the firebrick corners are fitted together with L-shaped notches. This type of joint lasts longer than the butted joint and the "picture frame" mitered joint found on competitive brands.

Long-Lasting Elements and Thermocouple

Dropped, recessed grooves protect the replaceable heating elements for longer life. Wires are fastened to the elements with heat-dissipating connectors refined and proven for decades in Paragon kilns. Rugged construction makes this little kiln a workhorse.

This kiln is built to last. Elements are coiled from the finest high-temperature wire available. The thermocouple, which senses the firing chamber temperature, is protected with a high-nickel stainless steel sheath for long life.

Return to Order

Watch the Interior Through the Optional Glass Window

You can order the FireFly Digital with an optional glass window in the top. The glass window is rated to 2300°F (1260°C), so it can easily withstand glass-fusing temperatures. Please note, however, that the window reduces the kiln’s maximum temperature to approximately 2100°F (1148°C) and is meant for glass fusing. (You can still fire porcelain and stoneware even with the window, but you will need to plug the window with ceramic fiber.)

Durable Paint

The FireFly Digital switchbox is coated with a durable high temperature, water-base finish. We chose this type of paint because of the low emissions during spraying. This creates a safer working environment for our employees and cuts down on pollution.

Built-in Stand, Long-Lasting Electrical Parts

A built-in 2 3/4" tall steel base with mar-proof rubber feet covers the entire firebrick bottom. Place the kiln directly onto a heat-resistant work surface. No extra stand is needed.

A stainless steel heat shield inside the switch box protects wiring from contact with the case. Costly nickel-plated copper wiring is covered with high temperature glass-braided insulation. Slots on the top, side, and bottom of the switch box circulate air for the long life of the electrical components. In addition, Paragon kilns go through a 15-step quality control inspection.

Designed for production

Paragon’s warranty is not affected by frequency of use. Fire your new kiln every day if you want, even in commercial settings. That will have no effect on the warranty period.

Optional colors at no extra charge

Brighten your studio with color! Order your kiln in one of our standard colors at no extra charge . . . berry, black, blue, hot pink, jade, navy, purple, or turquoise.

Return to Order

Specifications

Max. Temperature

2350F
1287C

Amps

13

Phase

1

Watts

1560

Nema

5-15R

Breaker Size

20

Circuit Copper Wire Size

12 gauge

TUV tested to CSA and UL Standard 499

Y

CE

N

IMPORTANT: Some areas such as Canada and Europe require a lid or door safety switch on kilns.

Voltage

120

Hertz

60

Nema Details







Disclaimer: The specifications above assume that the kiln will be plugged into a dedicated circuit. Local electric codes supersede our recommendations.

The pricing and electrical specifications for the above products reflect their design for use in the United States. The International versions of most models will have variations in electrical specifications and price due to consumer safety requirements or electrical regulations.

 

Kiln Type

Top Loading Square

Sides

4

Understanding Chamber Measurements

Chamber Volume

0.16 CU.FT.
4.53 litres

Chamber Length

8.00 IN
203 mm

Chamber Width

8.00 IN
203 mm

Chamber Depth

4.50 IN
114 mm


The Outer Size of the Kiln and the Shipping Size: Width = Left to Right; Depth = Front to Back; Height = Top to Bottom

Outer Size

15.00W x 18.50D x 12.00H Inches
381W x 470D x 305H mm

Ship Size

25.00W x 18.00D x 18.00H Inches
635W x 457D x 457H mm

Ship Weight

45.00 Lbs.
20.41 Kg.

Ship Method & Notations

This Kiln Ships Via UPS